LED Display Price Guide Australia (2026): All Types, All Applications

Australian LED display pricing spans a wider range than most buyers expect — from a few thousand dollars per square metre for coarse-pitch outdoor panels through to tens of thousands per square metre for broadcast-grade fine-pitch interiors. This guide maps the full spectrum by display type, application, and pixel pitch so procurement teams can budget accurately before approaching suppliers for project quotes.

All prices below are supply-only references in AUD, based on Aurora Signage’s 2026 trade price ranges for the Australian market. Installation, processing, mounting structure, and commissioning are costed separately and noted as percentage uplifts at each tier. All figures are exclusive of GST.

---

1. Indoor LED video walls

Indoor LED video walls are the highest-cost display category per square metre because fine pixel pitch demands more LEDs per module, tighter manufacturing tolerances, and more complex processing infrastructure.

Price ranges by pixel pitch

Pixel Pitch	Typical Application	Supply Price (AUD/m²)	Min. Comfortable Viewing Distance
P0.7–P0.9	Broadcast studio, simulation, research	$55,000–$90,000/m²	0.7–1.5 m
P1.2–P1.5	Executive briefing centre, premium boardroom	$30,000–$55,000/m²	1.2–2 m
P1.5–P1.9	Corporate boardroom, broadcast, control room	$18,000–$35,000/m²	1.5–2.5 m
P2.0–P2.5	Retail flagship, hospitality, conference venue	$10,000–$18,000/m²	2–3.5 m
P2.5–P3.0	Large lobby, retail concourse, auditorium	$7,000–$12,000/m²	2.5–4 m
P3.0–P4.0	Large-format feature wall, event venue	$5,000–$9,000/m²	3–5 m

Installation uplift: Add 30–50% of supply cost for structure, rigging, video processing, cabling, and commissioning on a standard indoor video wall project. Complex sites — heritage buildings, high ceilings, limited access — run 50–75%.

Common project budgets:

• 4×2 m boardroom wall at P1.9: $80,000–$140,000 supply-only; $110,000–$200,000 fully installed
• 6×3 m retail flagship wall at P2.5: $65,000–$115,000 supply-only; $90,000–$165,000 installed
• 10×4 m conference centre wall at P3: $70,000–$120,000 supply-only; $100,000–$175,000 installed

For a full breakdown by application type — retail, corporate, hospitality, stadium, and house of worship — see the LED Video Wall Cost in Australia (2026) detailed guide.

---

2. Outdoor LED billboard and DOOH displays

Outdoor LED displays carry lower supply cost per square metre than fine-pitch indoor but require weather-rated enclosures, high-nit brightness, and structural engineering that significantly increases total project cost.

Price ranges by pixel pitch and format

Pixel Pitch	Format	Supply Price (AUD/m²)	Brightness
P3–P5	Pedestrian-scale street furniture, transit shelter	$6,000–$11,000/m²	5,000–8,000 nits
P4–P6	Forecourt totem, building-mounted medium-format	$5,000–$9,000/m²	6,000–10,000 nits
P6–P8	Road-facing billboard, large transit concourse	$4,000–$7,500/m²	7,000–10,000 nits
P8–P10	Highway billboard, large-format OOH	$3,500–$6,500/m²	8,000–10,000 nits

Installation uplift: Outdoor billboard projects require civil works, structural engineering (wind-load certification to AS 1170), electrical connection, and earthing — typically adding 50–100% of cabinet supply cost depending on structure type and site conditions.

Common project budgets:

• 6×3 m roadside billboard at P8: $63,000–$117,000 supply-only; $95,000–$175,000 fully installed including structure and power
• 4×2 m forecourt totem at P5: $40,000–$72,000 supply-only; $60,000–$110,000 installed

See the LED Billboard Cost in Australia guide for a breakdown by outdoor format, approval pathway, and ongoing operating cost.

---

3. LED scoreboards and sport displays

Sport scoreboards range from small community-club installations through to large-format video scoreboards at elite venues, with cost driven by pixel pitch, structure complexity, and control system requirements.

Format	Typical Size	Indicative Budget (installed)
Community club scoreboard (P6–P8 outdoor)	3×1.5 m to 6×2 m	$25,000–$80,000
Regional venue scoreboard (P6 outdoor)	6×3 m to 10×4 m	$80,000–$200,000
Elite venue video scoreboard (P5–P6 outdoor)	10×6 m and above	$200,000–$600,000+
Stadium ribbon board / perimeter LED (P8–P10 outdoor)	Per 100 m run	$150,000–$400,000 per run

Aurora scoreboard quotes include iSCORE-compatible control hardware, content management software licensing (first year), structural engineering, and commissioning. Pricing scales more with structure and control complexity than cabinet count on smaller club installs.

---

4. Digital signage and wayfinding displays

Smaller-format LED digital signage — wayfinding totems, directory panels, retail promotional screens — is typically quoted per unit rather than per square metre.

Format	Display Size	Indicative Budget (installed per unit)
Indoor wayfinding totem (P2.5–P3 LED)	55–75 cm equivalent width	$4,500–$9,000
Retail end-cap LED panel (P2.5–P3)	1×0.5 m panel	$3,500–$6,500
Freestanding floor-mount LED kiosk	65–100 cm format	$5,000–$12,000
Transparent LED shopfront panel	Per m² supply	$4,000–$8,000/m²
Outdoor totem / pylon (P5–P6)	2×1 m panel	$12,000–$22,000

---

5. Total cost of ownership over 5–10 years

Supply price is the budgeting starting point, not the whole picture. For procurement teams modelling multi-year expenditure:

Power consumption: Fine-pitch indoor walls draw 200–600 W/m² at full brightness. A 10 m² boardroom wall at P1.9 consumes approximately $600–$1,800/year in electricity at Australian commercial power rates depending on brightness schedule and daily operating hours.

Maintenance: Aurora’s 5-year warranty covers parts and on-site labour. After warranty, budget 2–5% of supply cost per year for reactive maintenance on a managed service arrangement. Aurora-stocked Australian spares reduce response time versus an OEM-only parts chain.

Refresh cycle: LED cabinet lifespans are rated at 100,000 hours — approximately 11 years at 24/7 operation, or 17+ years at typical commercial schedules. A 10-year refresh budget is typically 60–80% of initial supply cost (component costs trend downward; on-site labour is the stable cost).

Use the Aurora Total Cost of Ownership Calculator to model the 5-, 7-, and 10-year cost of any Aurora wall — power, processor licensing, spares, calibration, and end-of-life.

---

What’s not included in supply prices

Cabinet prices above exclude:

• Video processing and routing infrastructure (typically $3,000–$25,000+ depending on input count and resolution)
• Mounting structure design and fabrication (highly site-dependent)
• Site works: data cabling, power reticulation, conduit, trunking
• Content management system licensing (if applicable)
• GST (10%)

Always request an all-in project price that specifies what is and is not included before comparing supplier quotes. A low cabinet-only price with large installation additions is not competitive against a higher cabinet price with installation included.

---

Getting a quote from Aurora

LED display pricing is project-specific. Screen area, pixel pitch, site conditions, processing requirements, and service terms all affect the final number. The ranges in this guide are supply references for early-stage budgeting only.

• Request a quote → — submit your application, area, and viewing distance for a tailored budget price
• Build your own in ScreenBuilder → — configure a cabinet grid and generate a spec sheet with cabinet counts
• Call 1300 841 542 — Aurora’s Adelaide-based team for same-day budget estimates on straightforward scopes