Aurora fine-pitch LED video wall installed in an operations centre environment

Perth & Western Australia

Control Room LED Perth

Aurora Signage supplies control room LED video walls for Perth NOCs, EOCs and command centres. Fine-pitch, 24/7-rated, high refresh rate — direct-view LED walls for critical operations environments.

Get a quote → Talk to a consultant

Control Room LED solutions for Perth

Perth's critical infrastructure operators — transport authorities, utilities, emergency services, and corporate NOCs — increasingly specify direct-view LED for control room display walls over rear-projection and LCD alternatives. LED’s zero-bezel construction eliminates the visual fragmentation that LCD video walls introduce at tile boundaries, while fine-pitch cabinets at P1.5–P2.5 deliver the spatial resolution operators need to read concurrent data streams, map overlays, and alarm states from a single viewing position.

Perth hosts the Australian and APAC headquarters of BHP, Rio Tinto and Fortescue, making corporate LED video walls a consistent market. Aurora installs with WA-based partners and also specifies for Pilbara FIFO hub facilities. Aurora supplies control room LED to Perth operators as a complete integrated system — fine-pitch LUX display wall, video processing matrix, real-time monitoring, and commissioning documentation. Australian-stocked spares and a local service presence mean replacement modules are on-site within 24 hours anywhere in Western Australia.

What we deliver in Perth

NOC display walls

Fine-pitch LED video walls for Perth network operations centres — P1.5–P2.5, 24/7-rated, high refresh rate for operator shift comfort.

EOC and emergency operations

Redundant-power LED display systems for Perth emergency operations and command centres — continuous duty, front-serviceable, no single point of failure.

Corporate command centres

Executive command and operations centre LED walls for Perth corporates — calibrated colour, ambient-adaptive brightness, AV-integrated.

Utility and infrastructure control rooms

24/7 LED video walls for Perth energy, water, and transport authority control rooms — SCADA-compatible, UPS-ready power, long service life.

Control room LED specifications for Perth

Perth control room LED is specified around three primary requirements: viewing distance (P1.2–P1.5 for single-operator workstations at 2–3 m; P1.9–P2.5 for overview walls at 4–8 m), continuous duty rating (Aurora LUX cabinets are rated for 24/7 operation with thermal management and redundant power as standard for control room applications), and refresh rate (≥3,840 Hz standard on Aurora broadcast and control-room specification to eliminate flicker fatigue on extended operator shifts). Perth's extreme summer heat, highest UV irradiance of any Australian capital, and coastal winds requiring 6,500–8,000 nit outdoor brightness and AS 1170 wind-load rated enclosures. Aurora provides Australian engineering certificates, AS/NZS compliance documentation, and factory acceptance test reports for Perth control room procurement teams.

Serving Perth and surrounds

Aurora Signage Pty Ltd (ABN 22 620 120 836) is headquartered in Marleston, Adelaide — approximately 2,700 km from Perth. All Perth projects are engineered from our Adelaide head office and installed with WA-based installation partners.

Aurora Signage Pty Ltd

3/60 Grove Avenue

Marleston SA 5033

ABN 22 620 120 836

Contact

1300 841 542

sales@aurorasignage.com.au

Mon–Fri 8:30 am – 5:00 pm ACST

Request a quote → Contact us